CHANGES IN PHYSICOCHEMICAL PROPERTIES OF INSTANT KUNUN ZAKI FLOURS PRODUCED FROM MILLET (Pennisetum typhoiduem) AND MALTS OF COWPEA (Vigna unguiculata) AND SOYBEAN (Glycine max) DURING STORAGE

ABSTRACT 
In this study, instant kunun zaki powders were produced from millet-cowpea malt and millet- soybean malt. The instant powders were packaged in polypropylene plastics and stored for 3 months. During this period, studies of the changes in physiochemical and functional properties of the packaged flour were carried out every 30 days for 3 months. Production of instant powders was by blending millet with malt of cowpea for millet cowpea malt (MCm) and millet with malt of soybean for millet-soybean malt (MSm) each in the ratio of 70:30 w/w. Ginger was added to each blend in the ratio 15:1 w/w. The blends were incubated  at  28+30C  for  15  minutes  and  instantized  by  steam-heating  for  10  minutes followed by oven drying at 500C to a moisture content of 6.23% for MCm  and 6.34% for MSm. The flour blends were then packaged in polypropylene plastic (12x18cm) and storedfor three months at 28+30C. During this storage period, studies of the changes in physiochemical properties of the packaged flour were determined every 30 days. The results showed that diastatic activities of cowpea and soybean increased with malting, with that of cowpea being higher (63.330L) than that of soybean (30.000L). Protein and sugar contents increased after malting, whereas fat and TBA content decreased with malting. During storage however, there was a general increase in moisture content, sugar, fat, TBA, tannin and trypsin inhibitor in all the samples. Protein content decreased with storage. Water absorption capacity, bulk density, solubility, dispersibility and viscosity decreased with storage time. The particle sizes of the flours increased with storage.

TABLE OF CONTENTS
Title page
Abstract
Table of contents
List of Tables
List of Figures

CHAPTER ONE
INTRODUCTION
2.0 LITERATURE REVIEW
2.1 Beverages
2.2 Kunun zaki
2.2.1 Raw materials and kunun zaki production
2.2.1.1 Millet (Pennisetum typhoideum)
2.2.1.2 Cowpea (Vigna unguiculata)
2.2.1.3 Soybean (Glycine max)
2.2.1.4 Ginger (Zingiber officinale)
2.2.2 Processes incorporated in the modification of kunun zaki production
2.2.2.1 Malting
2.2.2.2 Instatization
2.2.3 Packaging

CHAPTER THREE
3.         MATERIALS AND METHODS
3.1 Materials
3.2  Methods
3.2.1 Production of steam-heated instant kunun zaki production
3.2.2 Packaging and storage studies
3.2.3 Chemical analysis
3.2.4 Determination of  Anti-nutrients
3.2.5 Analysis of physical properties
3.2.6 Analysis of functional properties
3.2.7 Statistical analysis

CHAPTER FOUR
4.         RESULTS AND DISCUSSION

CHAPTER FIVE
5.         CONCLUSION AND RECOMMENDATIONS
REFERENCES
APPENDICES

CHAPTER ONE
1.   INTRODUCTION
Kunun zaki is a traditional, non-alcoholic and non-carbonated beverage widely consumed in Northern Nigeria and is becoming popular in the South .It is consumed at any time of the day by both adults and children, as breakfast drink. It an appetizer and it is commonly served at social gatherings. The ingredients used in its manufacture include, millet (Pennisetum typhoideum), sorghum (Sorghum vulgare), maize (Zea mays), rice (Oryza sativa), spices [ginger (Zingiber officinale), garlic (Allium sativum), red peeper

(Capsicum annuum), black pepper (Piper nigrum), clove (Syzygium aromaticum)]. Also Cadaba farinosa, potatoes (Ipomea batatas)(Efiuvwevwere and Akoma, 1995). Tiger nuts (Cyperus esculentus) and groundnut (Arachis hypogea) may be added to sweeten and enrich protein content.
Kunun zaki is rich in carbohydrates, vitamins and minerals but it is low in protein (Ayo and Okaka, 1998). Sugar may be added instead of pepper to meet the demands of some consumers (Onuorah et al, 1987; Akoma et al 2006). Some consumers consume kunun zakiwithout sugar or pepper (Adeyemi and Umar, 1994). Kunun zaki is accepted based on its colour (cream) and flavour (millet mixed with ginger flavour).
Traditionally, kunun zaki is produced by steeping the grains in water, wet milling with spices and sieving, the overall process taking 24 hours (Adeyemi and Umar, 1994). This traditional method has been improved by shortening the processing time to 12 hours by steeping the grains in warm water containing 15% sodium metabisulphate, wet-milling, liquefication and saccharification with enzymes in the grain, filtering, bottling and pasteurization at 80oC for 30 minutes before refrigeration at 4-8 oC (Gaffa and Ayo, 2002). Traditionally produced kunun zaki has a shelf life of about 24 hours (Adeyemi and Umar, 1994) at ambient temperature. The improved method can however extend the shelf life to 8 days after pasteurization followed by refrigeration storage (Osuntogun and Aboada, 2004) which can last for 90 days when chemical preservation is applied as has been achieved by FIIRO, Nigeria (Haard, 1998). Also instant kunun zakiflour has been produced by Dala Foods Limited Kano, Nigeria and commercialized Kunun Tsamiya, the product being made only from millet. Further work was done by Amazikwu (2007) where she produced instantkunun zaki flours from millet-cowpea malt and millet-soybean malt to enhance protein content and sensory quality. She also carried out sensory evaluation and the samples were rated acceptable by consumers. However no packaging or storage studies have been carried out on the instant powders and shelf life is also largely dependent upon the storage conditions and packaging materials used. This work is therefore a follow up of the work done by Amazikwu (2007). Against this background, this project was designed to produce instant kunun zaki flours from millet-cowpea malt and millet-soybean malt combinations and store in good flexible packaging material. Specific attention was therefore directed at;
producing instant kunun zaki powders from millet-cowpea malt and millet-soybean malt by steam heating....

For more Food Science & Technology Projects click here
================================================================
Item Type: Project Material  |  Attribute: 85 pages  |  Chapters: 1-5
Format: MS Word  |  Price: N3,000  |  Delivery: Within 30Mins.
================================================================

Share:

No comments:

Post a Comment

Select Your Department

Featured Post

Reporting and discussing your findings

This page deals with the central part of the thesis, where you present the data that forms the basis of your investigation, shaped by the...

Followers